Recline Button And Recline Indicator - Britax ONE4LIFE CLICKTIGHT Guide D'utilisation

Recline Button and Recline Indicator

NOTES:
• The seat has nine (9) recline positions.
• Set the recline position before installing.
• The vehicle MUST be on level ground.
• If necessary, the proper recline angle REAR-facing ONLY
can be achieved by placing a rolled towel or pool noodle
under the base.
Reclining the Seat in Harness Mode
1. Push the recline button
on either side of the
base and rotate the child
restraint until it is in the
desired recline position.
2. Check the recline
indicator on the side of
child restraint for correct
angle. Look straight on
at the recline indicator
window and check that
the tip of the recline
indicator arrow is in the
correct position (see next
page).
3. Release the recline
button and verify the
restraint has locked
into position.
14