Using With The Base; Overhang; Adjusting The Recline Angle - Britax B-SAFE GEN2 Guide D'utilisation

BRITAX Child Safety, Ltd.

Using With the Base

Before installing the infant car seat:
• Check that your vehicle seat belt is compatible with
the infant car seat by referring to your vehicle owner's
manual and page 38 in this user guide.

Overhang

It is important that the base of
the child seat rests completely
flat on the vehicle seat� As
seen in the illustration, it is
permissible to allow up to
7�6 cm (3 in�) of the base to
hang over the edge of the
vehicle seat� Some vehicle
seats do not allow enough of
the child seat base to contact
the vehicle seat� If this is the
case, choose another seating
position� Not doing so could
cause the child seat to not
perform as intended�

Adjusting the Recline Angle

IMPORTANT:
parked on a level surface.
1. Pull up on the recline
adjustment lever.
10
Vehicle must be
7.6 cm