Britax ONE4LIFE CLICKTIGHT Guide D'utilisation page 27

3. Recline child restraint
to the appropriate
position. Refer to
page 15 to determine
appropriate recline
position.
4. Place the child restraint
FORWARD-facing on the
vehicle seat so that the
bottom of the base sits
flat on the vehicle seat.
5. Ensure that no more
than 7.5 cm (3 in) of the
base hangs over the
front edge of the vehicle
seat.
6. Open the CLICKTIGHT
door. Squeeze the
CLICKTIGHT release
buttons underneath the
front cover flap and lift
to open.
7. Route the vehicle lap-
shoulder belt through
the FORWARD-facing
belt path marked by
green labels.
8. Ensure the belt is not
twisted, then buckle
the vehicle seat belt.
9. Remove slack from the
lap part (A), then the
shoulder part (B) of the
vehicle seat
10. Close the CLICKTIGHT
door over the vehicle
seat belt.
belt.
B
A
ADJUSTMENT
SLOT
7.5 cm
25