Britax ONE4LIFE CLICKTIGHT Guide D'utilisation page 29

FORWARD-Facing Installation with LUAS
Do NOT install by this method for a child weighing more
than 16 kg (35 lb).
1. Extend the top tether strap
by lifting on the top tether
adjuster.
2. Unhook the top tether
hook from the back of
the child restraint and
place it up and over the
seatback.
3. Open the CLICKTIGHT
door. Squeeze the
CLICKTIGHT release
buttons underneath
the front cover flap
and lift to open.
4. Open the storage
pocket. Remove the
lower connectors
by pushing the red
buttons and pulling
away from the child
restraint.
5. Extend lower
connector strap to
its longest length by
pressing grey button
on adjuster.
6. Recline child restraint to
the appropriate position.
Refer to page 15 to
determine appropriate
recline position.
7. Place child restraint
FORWARD-facing on the
vehicle seat so that the
bottom of the base sits
flat on the vehicle seat.
8. Ensure that no more than
7.5 cm (3 in) of the base
hangs over the front edge
of the vehicle seat.
7.5 cm
27