Britax ONE4LIFE CLICKTIGHT Guide D'utilisation page 32

7. Route the lap vehicle
belt through the
FORWARD-facing belt
path marked by green
labels.
8. Ensure the belt is not
twisted and fasten the
seat belt.
9. Push down into the middle
of the child restraint with
moderate force (approximately
20.4 kg/45 lb), compressing
the vehicle seat while
tightening the vehicle belt.
NOTE: Make sure the vehicle
belt is locked as directed by
your vehicle owner's manual.
10. Close the CLICKTIGHT door
over the vehicle seat belt.
11. Ensure both CLICKTIGHT
release buttons are visible.
NOTE: If it is difficult
to close, you may have
removed too much slack.
12. Connect the top tether hook to the
vehicle's top tether anchor
(check the vehicle owner's
manual for location).
13. Pull the top tether strap to
remove slack and secure
excess webbing with the
elastic band attached.
30