Britax ONE4LIFE CLICKTIGHT Guide D'utilisation page 47

Installing the Headrest Cover
1. Raise the headrest to the
highest position. Tuck
both sides of the headrest
cover under and around
the headrest foam.
2. Route the elastic
strap around headrest
adjuster.
3. Slide harness straps
through the cover slots
and close fasteners.
Installing the Anti-Rebound Bar Cover
1. Slide the cover on the
black portion of the anti-
rebound bar.
2. Attach the small elastic
loops to the plastic tabs.
3. Install the anti-rebound
bar. Insert the anti-
rebound bar into the
two (2) openings at the
front of the seat.
4. Attach elastic bands
from the cover to the
hooks on the shell.
5. Pull the anti-rebound bar
to ensure it is properly set.
45