Care.and.maintenance; Cover Removal - Britax Frontier XT SICT Guide D'utilisation

Care and Maintenance

Cover Removal

WARNING!
• Never remove the buckle tongues from the harness.
• DO NOT remove the HUGS™ chest pads from the
harness straps.
• Side Impact Cushions are permanent. DO NOT remove.
Loosen the harness.
1
a Press release lever
b Pull both harness straps forward
Unbuckle the harness, then
2
move the harness adjuster to
the highest position.
Remove the screw to unlock
3
the head restraint adjuster and
raise the head restraint to the
highest position.
* Store the screw in the slot in
the shell.
Detach the hook and loop
4
fasteners on the head restraint
cover from around the
harness.
Unhook the elastic bands,
5
then remove the cover from
the head restraint.
* Be careful not to damage the
energy-absorbing foam.
42
Locking.
Screw.storage
4
Unfasten the clips behind the
6
armrests, then pull the cover
from the lower belt guides.
Remove the belly pad from the
7
harness buckle.
a Pull the buckle through the belly
pad.
b Remove the elastic strap from
around the buckle.
Remove the elastic loops from
8
the hooks on the bottom of the
child seat, then pull the lower
part of the cover from the
bottom of the child seat shell.
Pull the cover fabric from
9
between the Side Impact
Cushion and child seat shell.
Route the cover around the
10
head restraint and remove the
entire cover from the child
seat shell.
Care and Maintenance
7a 7b
9
43