Using With The Base; Overhang; Adjusting The Recline Angle - Britax B-SAFE GEN2 FLEXFIT Guide D'utilisation

BRITAX Child Safety, Ltd.

Using With the Base

Before installing the infant car seat:
• Check that your vehicle seat belt is compatible with
the infant car seat by referring to your vehicle owner's
manual and page 41 in this user guide�

Overhang

It is important that the
base of the child seat rests
completely flat on the vehicle
seat� It is permissible to allow
up to 7�6 cm (3 in�) of the
base to hang over the edge of
the vehicle seat� Some vehicle
seats do not allow enough of
the child seat base to contact
the vehicle seat� If this is the
case, choose another seating
position� Failure to do so
could cause the child seat to
not perform as intended�

Adjusting the Recline Angle

IMPORTANT:
1. Pull up on the recline
adjustment lever.
10
Vehicle must be parked on a level surface.
7.6 cm