Britax ONE4LIFE CLICKTIGHT Guide D'utilisation page 30

9. Route the lower
connector strap through
the FORWARD-facing
belt path marked by
green labels.
10. Firmly press lower
connectors onto their
adjacent anchors until
a click is heard.
11. Ensure the connector
strap is not twisted.
Pull the end of the
lower connector strap
to remove slack.
12. Close the CLICKTIGHT
door over the lower
connector strap.
13. Ensure both
CLICKTIGHT release
buttons are visible.
NOTE: If it is difficult
to close, you may have
removed too much slack.
14. Connect the top tether hook
to the vehicle's top tether
anchor (check the vehicle
owner's manual for location).
15. Pull the top tether strap to
remove slack and secure
excess webbing with the
elastic band attached.
NOTE: Do NOT install by this method for a child weighing
more than 16 kg (35 lb).
28
ADJUSTMENT
SLOT
ADJUSTMENT
SLOT