Inspection And Maintenance Plan - Güde KS 400-41 Traduction Du Mode D'emploi D'origine

Inspection and maintenance plan

Generally
Before any start-up
After every take out of
service
Storage
Complete saw
Plastic body
Saw chain
Chain saw bar
Chain saw wheel
Chain break
Clutch
Saw chain
Chain saw bar
Chain lubrication
Chain break
Follow-up brake
ON/OFF switch
Oil tank cap
Chain saw bar
Bar fixture
Chain oil tank
Saw chain / Chain saw bar
Complete saw
Regularly clean the outer part
Let regularly checked by authorized workshop
Check for cracks and fissures
Let regularly sharpen.
Clean regularly
Clean regularly
Regular functional test
Regular functional test (Chain can not move in idle run).
Check for damages and sharpness
Check the chain tension
Functional test
Functional test
Functional test
Functional test
Check for tightness
In case damage let repaired in authorized workshop
Clean the oil top-up opening
Clean above all guiding oil groove
Drain
Dismount, clean and lubricate slightly by oil Clean the
saw guiding groove
Cleaned chain saw store safely in dry room - out of
children reach.
Let the chain saw checked by authorized workshop after
long term storage (remaining oil can be resinous and
clog the oil pump valve)
ENGLISH
37