Front Turn Signal Indicators; Rear Turn Signal Indicators - Ducati SUPERBIKE 749R 2005 Manuel D'utilisation

Masquer les pouces Voir aussi pour SUPERBIKE 749R 2005:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Front turn signal indicators (fig. 70)
Notes
For the sake of simplification, the rear-view mirror on
which the turn signal indicator is mounted is shown
removed from the headlamp fairing.
Remove the screws (1) and separate the cup (2) from the
indicator/mirror support.
The bulb has a bayonet-type base: to remove, press in and
turn anticlockwise. Replace the bulb and re-insert by
pressing in and turning clockwise till it clicks into place.
Mount the cup in the slot in the indicator support so that
their shapes fit together.
Tighten the screws (1).
Rear turn signal indicators (fig. 71)
To change the rear turn signal indicator bulbs, give the
indicator body (3) a quarter turn, hold it with the lens
upward and take it out of the indicator support.
The bulb has a bayonet-type base: to remove, press in and
turn anticlockwise. Replace the bulb and re-insert by
pressing in and turning clockwise till it clicks into place.
Mount the indicator body (3) on its support and give it a
quarter turn.
https://www.motorcycle-manual.com/
1
3
2
E
fig. 70
fig. 71
71

Publicité

Table des Matières
loading

Table des Matières