Alarm Options - MSA Altair 5X Mode D'emploi

3.4.2 Alarm Options

The Alarm Options menu allows user to:
• enable/disable the vibrating alarm
• enable/disable the audible alarm (horn)
• enable/disable the Alarm LEDs
• enable/disable the MOTIONALERT SELECTION page.
• If disabled, the user cannot change the instrument
MotionAlert setting.
• set Sensor Alarms.
Press the:
• ▼ button go to next page
• ▲ button to go previous page
• button to enter setup.
Setting Vibrating Alarm
• Press the
Setting Horn Alarm
• Press button to turn this option ON or OFF.
Setting LED Alarm
• Press the
Setting MotionAlert Access
Setting this parameter allows the user to access the MOTIONALERT
page from the MEASURE page.
• If access is denied here:
• the user cannot access the MOTIONALERT page to enable or
disable that feature
• the InstantAlert feature (Section 2.2.3.3) cannot be activated.
1. To grant or deny user access to the MOTIONALERT page, use the
button to change the indicated selection.
Figure 3-4. Alarm Options
button to turn this option ON or OFF.
button to turn this option ON or OFF.
3-9