Calibration Options - MSA Altair 5X Mode D'emploi

3.4.1 Calibration Options

The Calibration Options menu allows the user to:
• modify the calibration cylinder settings
(CYLINDER SETUP)
• enable/disable calibration due date notification and set the number
of days (CAL DUE OPTIONS)
• When enabled, the number of days until instrument calibration
is due displays during the turn-ON process.
• enable/disable the option to show the last cal date at turn-ON
(LAST CAL DATE)
• When enabled, the date of the last instrument calibration
displays during the turn-ON process.
• enable/disable the option for password-protected calibration
(CAL PASSWORD).
• When enabled, the instrument setup password must be
entered prior to calibration.
1. Press the:
• ▼ button go to next page
• ▲ button to go previous page
• button to enter setup.
Setting Calibration Cylinder
This option has a dialog similar to the span calibration dialog.
The display shows all active sensors.
1. Press the
• The screen for the first calibration cylinder displays.
2. Press the:
• ▼ or ▲ button to change the value.
• button to confirm the setup.
With this confirmation, the instrument automatically moves to the
next cylinder setting.
button to enter setup.
3-7