Viewing Additional; Bump Test (Bump Page) - MSA Altair 5X Mode D'emploi

2.4 Viewing Additional Pages
The Main Screen appears at instrument turn-ON.
Additional displays can be viewed by pressing the ▼ button to move to the
screen as indicated by the "soft key".
(For the monochrome display, the name of the page is displayed; for the
color display, it is represented by an icon.)
The sequence of pages are as follows and are described below:

2.4.1 Bump Test (BUMP page)

This page allows the user to perform an automated Bump Test on the
instrument. To perform the test, the (YES) button is pressed.
See Section 3.7 for details on performing the Bump Test.
If the ▼ button is pressed, the Bump Test is not performed, and the display
shows the next page in the sequence (PEAK).
If the ▲ button is pressed, the Bump Test is not performed, and the display
reverts back to the normal MEASURE page.
2-10