MSA Altair 5X Mode D'emploi page 45

Time and Date Set
The instrument first prompts the user to set the time;
then, it prompts for the date.
NOTE: The time can be set for either regular AM/PM or military time
through MSA Link software. AM/PM time is the default setting.
1. Press the
2. Change hours by pressing the ▼ or ▲ button.
Increment through noon for PM hours.
3. Confirm by pressing the
4. Change minutes by pressing the ▼ or ▲ button.
5. Confirm by pressing the
• The instrument goes to the SET DATE page.
6. Change month, date, and year by pressing the ▼ or ▲ button:
7. confirming by pressing the
• The instrument goes to the next SETUP page.
Setting Datalog Interval
This option is for setting the interval at which all the readings
are logged.
1. Press the
2. Change interval by pressing the ▼ or ▲ button.
3. Confirm by pressing the
• The instrument goes to the next SETUP page.
Setting Stealth Mode
Stealth mode disables the visual, audible and vibrating alarms.
1. Press the
2. Press the ▼ button to go to the next page or the ▲ button
to return to the previous page.
Setting Operating Beep
1. Press the
2. Press the ▼ button to go to the next page or the ▲ button to
return to the previous page.
3-14
button to enter setup.
button.
button.
button to enter Setup.
button.
button to change mode (ON/OFF).
button to change mode (ON/OFF).
button.