Viewing Optional Displays; Peak Readings (Peak) - MSA SIRIUS Manuel D'instructions

WARNING!
If an alarm condition is reached while using the instrument as a personal or area monitor,
leave the area immediately; the ambient condition has reached a preset alarm level. If
using the instrument as an inspection device, do not enter the area without proper
protection.

4.2 Viewing Optional Displays

See 2.2 Moving through the SIRIUS Multigas Detector Pages which shows the flow
diagram for optional displays.
Press the PAGE/ button to move to the various screens.
NOTE:
The page will default back to the Measure page within 30 seconds.
4.2.1 Peak Readings (PEAK) (Figure 11)
PEAK appears in the upper portion of the display to show the highest levels of gas
recorded by the SIRIUS Detector since:
• Turn-ON or
• Peak readings were reset.
• To Reset the Peak Readings:
1. Access the Peak page.
2. Press the RESET/ button.
Measuring Gas Concentrations
Figure 10:
Instrument in
VOC Gas Alarm
4
23