Electric Shock Hazard; Personal Protective Equipment - Storch SL 1500 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 66

ELECTRIC SHOCK HAZARD

Improper earthing, setup, or usage of the system can cause electric shock.
Turn off and disconnect the power cable before servicing the equipment.
Only use earthed electrical outlets.
Use only 3-wire extension cords.
Make sure earthing contacts are intact on the sprayer and extension cables.
Do not expose to rain. Store indoors
PRESSURISED ALUMINIUM PARTS HAZARD
Use of fluids that are incompatible with aluminium in pressurised equipment can cause serious chemical reaction and
equipment defects. Failure to observe this warning can result in death, severe injury or damage to property.
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing
such solvents.
Many other fluids may contain chemicals that can react with aluminium. Contact your material supplier for compa-
tibility.
MOVING PARTS HAZARD
Moving parts can pinch, cut or amputate fingers and other body parts.
Keep clear of moving parts.
Do not operate equipment with protective guards or covers removed.
Pressurised equipment can start without warning. Before checking, moving, or servicing equipment, follow the
Pressure Relief Procedure and disconnect all power sources.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equip-
ment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns.
This equipment includes but is not limited to:
Protective eyewear, and hearing protection.
Respirators, protective clothing, and gloves as recommended by the fluid and
solvent manufacturer.
133

Publicité

Table des Matières
loading

Table des Matières