Description; Nameplate - CIAT ITEX Manuel D'instructions

ENGLISH

1.8 - Description

1 - Frame plate
2 - Pressure plate
3 - Tightening bolts
4 - Guiding/Carrying bar
32
5 - Guiding bar 9 - Roller
6 - Aluminium Spacer 10 - Feet
7 - Plates + gaskets 11 - Liners
8 - Column 12 - Porthole

1.9 - Nameplate

• Stuck to the frame plates.
ENGLISH
• MANUFACTURING YEAR: Year of manufacture.
• MODEL: Heat exchanger model and product configuration.
• SERIAL No.: Production number, to identify your heat
exchanger.
• DATE: Date of manufacture.
• REF.: Eventual notes and/or different references.
• ALLOWABLE TEMPERATURE MIN. / MAX. (TS):
Minimum and maximum allowable temperatures.
• ALLOWABLE PRESSURE MIN. / MAX. (PS):
Minimum and maximum allowable pressu-
d
re, in bar.
• TEST PRESSURE (PT): Test pressure, in bar.
• VOLUME: Capacity of each exchanger cir-
cuit in liters.
• PED 2014/68/EU CLASSIFICATION: Risk
category of the heat exchanger (hazard
group and physical state of the fluid).
• CE MARKING: Only the heat exchangers classified in PED
2014/68/EU risk category I, II, III or IV can be CE marked.
The identification number of the Notified Body will appear
near to the CE Mark symbol for heat exchangers classified
in risk category II, III or IV.
• CIRCULATION: 1 indicates the inlet and outlet of the primary
loop. 2 indicates the inlet and outlet of the secondary loop.
• TIGHTENING MEASURE: Minimum and maximum tightening
dimension (d) between the plates, in mm.
• WEIGHT (EMPTY): Empty weight of the heat exchanger,
in kilograms.
EN
33