After Use; Cleaning And; Storage And; Maintenance - Meister AS18A Traduction Du Manuel D'utilisation Original

• Switch position 2:
0 – 1500 min ­1
screws and drilling
The revolution range to be select­
ed is determined by the relevant
material and the intended task and
should be tested using a test piece.
CAUTION! Only switch over
when the motor is at a stand­
still.
11 – After use
• Release the On/Off switch to
switch the machine off.
• Set the left/right rotation to the
middle position to block the On/
Off switch and prevent uninten­
tional activation of the machine.
• Remove the rechargeable battery
and the tool before you clean and
store the machine.
• Clean the machine as described
under "Cleaning and maintenance".
12 – Cleaning and mainte­
nance
Cleaning
CAUTION! Electric shock!
WARNING! Risk of electric
shock!
• Wait until the machine has cooled
down and remove the rechargea­
ble battery from the machine.
• Before cleaning the charger,
always pull the plug out.
5400440-Akku-Bohrs_man1.indd 71
for installing
• Make sure that no water is able to
enter the machine.
• Do not damage the surfaces of
the machine.
• Do not use aggressive cleaning
agents, brushes with metal or
nylon bristles, or sharp or metal­
lic cleaning tools such as knives,
hard spatulas or similar.
• Use a mild cleaning agent and a
dry or damp, but not dripping wet,
cloth. Do not use cleaning agents
that contain solvents!
• Always keep the ventilation slots
free from dust deposits in order
to prevent the machine from over­
heating.
• Dry the machine and tools with a
soft cloth.
• We recommend cleaning the
machine after every use.

Maintenance

The machine does not contain any
parts that need to be maintained or
lubricated by the user.
13 – Storage and transpor­
tation
Storage
1. Clean the device as described
above.
2. Store the device in a dry place
that cannot be accessed by chil­
dren.
71
17.06.19 10:59