Correct Use - Meister MPH1400-1 Traduction Du Manuel D'utilisation Original

5452820-Bohrhammer_man 12.02.18 12:19 Seite 46
7 Wing screw
8 Mode selection switch for
drilling/hammer drilling/chasing
9 Gear oil filler opening
10 Vibration damper
11 Dust collector
12 Key for gear oil filling opening
4 – Correct use
This hammer drill is designed for
drilling and hammer drilling into
concrete/stone/masonry as well as
for light chasing work in a private
setting. Only use suitable
accessories (observe the
manufacturer specifications).
All other uses are expressly excluded.
The tool holder is suitable for tools
that use the SDS-plus system
This unit is only designed for private
use.
Incorrect use of the product
All applications carried out with the
device that are not listed in the
"Intended use" chapter will be
considered improper use.
Applications for which the power
tool are not intended may cause
risks and injuries. Do not use
accessories that have not been
designed and recommended by the
manufacturer for this specific power
tool.
Just because you are able to attach
an accessory to your power tool this
46
does not guarantee that it is safe to
use.
The permitted revolutions of the
insertion tool must be at least as
high as the highest value specified
on the electrical tool. Accessories
that rotate faster than they are
permitted to may break and fly.
There is a risk of injury. The user of
the device is liable for all property
and personal damages occurring as
the result of incorrect use.
If other components or non-original
components are used with the
machine, the manufacturer
guarantee is voided.
Residual risks
The operating instructions for
this electrical tool contain
comprehensive tips for the safe
handling of electrical tools.
However, every electrical tool has a
certain level of remaining risks
which cannot be excluded by the
protective mechanisms on the
device. Always operate electrical
tools with the necessary care.
Residual risks may be, for
example:
• Touching rotating parts or tools.
• Injury caused by flying tools or
tool parts.
• Risk of fire caused by insufficient
ventilation of the motor.