Correct Use - Meister MSB750-1 Traduction Du Manuel D'utilisation Original

7 Clockwise/anti-clockwise switch
8 Additional handle
9 Depth stop
10 Chuck
11 Wing screw
4 – Correct use
MSB750-1 designates a hammer drill
with 750 Watt power output. The proper
use of this power tool comprises
drilling of wood and metal as well
as hammer drilling of concrete and
masonry. Only use the power tool,
tools and accessories for additional
tasks (observe the manufacturer specifi-
cations) when they are within
the scope of proper use. All other uses
are expressly forbidden.
This power tool is intended for use in
domestic household only.
Children should be supervised to ensure
that they do not play with the device.
CAUTION! Intervention on the
power tool outside the scope of
proper use will invalidate the warranty
claim.
Improper use of the product
This power tool may not be used as a
screwdriver.
All applications carried out with the
device that are not listed in the "Correct
use" chapter will be considered improp-
er use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended spe-
cifically for this electrical tool.
5452220-Schlagbohrmaschine_man.indd 41 5452220-Schlagbohrmaschine_man.indd 41
Just because you can affix an accessory
to your electrical tool, there is no guar-
antee it is safe to use.
The permitted revolutions of the tool
insert must be at least as high as the
highest value specified on the electrical
tool. Accessories that turn faster than is
permitted may break and fly away.
The external diameter and thickness
of the tool insert must match the dimen-
sions of your electrical tool. Incorrectly
measured tool inserts cannot be proper-
ly protected or checked.
Drill bits or other accessories must fit
precisely into the tool holder of your
power tool. Tools that do not fit pre-
cisely into the tool holder of the power
tool will rotate unevenly, vibrate heavily
and may cause loss of control over the
device.
There is a risk of injury.
The user of the device is liable for all
property and personal damages occur-
ring as the result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks:
The operating instructions for this elec-
trical tool contain comprehensive tips
for the safe handling of electrical tools.
However, every electrical tool has a cer-
tain level of remaining risks which can-
not be excluded by the protective mech-
anisms on the device. Always operate
electrical tools with the necessary care.
41
17.07.20 06:49 17.07.20 06:49