Meister AS18A Traduction Du Manuel D'utilisation Original page 60

erly used. Use of these devices
can reduce dust related hazards.
h Do not assume a false sense
of security and do not overstep
the safety rules for power tools,
even if you are familiar with the
power tool after many uses.
Careless actions may cause seri­
ous injuries within fractions of a
second.
4 Power tool use and care
a Do not force the power tool.
Use the correct power tool for
your application. The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the
power source before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of start­
ing the power tool accidentally.
d Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with
the power tool or these instruc­
tions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
e Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
60
5400440-Akku-Bohrs_man1.indd 60
that may affect the power tool's
operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and
clean. Properly maintained cut­
ting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g Use the power tool, accessories
and tool bits etc.
in accordance with these
instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for opera­
tions different from those intend­
ed could result in a hazardous
situation.
h Keep handles and grips dry,
clean, and free from oil and
grease. Slippery handles and
grips do not enable safe handling
and control of the power tool in
the event of unexpected situa­
tions.
5 Use and care of cordless tool
a When recharging a battery, only
use chargers that have been
recommended by the manu­
facturer. With a charger that is
designed for use with a particular
type of battery, there is a risk of
fire if it is used with other battery
types.
b Only use the rechargeable bat­
teries intended for the
power tools. The use of other
batteries may lead to injury and
risk of fire.
17.06.19 10:59