Components; Correct Use - Meister MPH1500-1 Traduction Du Manuel D'utilisation Original

switch position for the work you wish
to carry out. Otherwise you may be at
risk of injury when the tool starts up.
• Avoid allowing the motor to come to
a standstill under load when drilling or
screwing screws.
Safety marks on the type plate
The symbols on the housing have the
following meanings:
Do not dispose of with the
household waste!
Important! Observe the
operating instructions!
Wear goggles.
Wear ear defenders.
Wear a dust protection
mask.
Housing is double insulated.
CE mark (conformity with
European safety standards)
Voluntary „geprüfte Sicher­
heit" seal of quality (tested
safety)
Suitable for tools using the
SDS+ system
BJ Year of construction
SN: Serial number
SN: XXXXX The first two underlined
numbers give the month of
42
manufacture.
MW-5452860-Bedien-2008.indd 42 MW-5452860-Bedien-2008.indd 42
3 – Components
1 Selection knob for hammer drilling/
chasing
2 Gear oil filler opening
3 Vibration damper
4 Speed preselection
5 On/Off switch
6 On/Off switch for hammer action
7 Handle
8 Additional handle
9 Clamp opening
10 Depth stop
11 Tool receiving socket
12 Holding bush
13 Wing screw
14 Dust collector
15 LED operating display
4 – Correct use
This rotary hammer drill is suitable for
drilling and hammer­drilling concrete,
stone, masonry and light chiselling work
around the house. Use only suitable
accessories (note manufacturer's
instructions). All other applications are
expressly excluded. Chuck designed for
SDS+ system tools
The machine is intended only for use in
the household.
This unit may not be used by people
(including children) with reduced physical,
sensory or mental capacities, with a lack
of experience and without the appropriate
knowledge, unless they are supervised
by someone who is responsible for their
safety or have been instructed by such
a person with regard to how the unit
is to be operated. Children should be
supervised to ensure that they do not
play with the device.
24.08.20 13:10 24.08.20 13:10