Components; Correct Use - Meister SB500M Traduction Du Manuel D'utilisation Original

5402020-Schlagbohr_man 11.12.14 09:17 Seite 34
The specified vibration emission value
can also be used for an introductory
evaluation of the influence.
The actual vibration emission value
present during the use of the machine
may deviate from the specification given
in the operating instructions or made by
the manufacturer. This may be caused
by the following influencing factors that
should be taken into account prior to
and during each use:
• Is the device being used correctly?
• Is the correct type of material being
processed?
• Is the device in proper working order?
• Are the handles or optional vibration
handles mounted and fixed securely
up against the body of the machine?
If your hands experience an unpleasant
sensation or the skin changes colour
while you are using the machine,
immediately discontinue your work. Take
sufficient breaks. If you do not take
sufficient breaks, this may cause a
hand/arm vibration syndrome.
You should estimate the level of load
caused in conjunction with the work or
use of the machine and take the
appropriate breaks. This method can be
used to considerably minimise the level
of load during the entire working time.
Minimise risks in which you are exposed
to vibrations. Take care of your
machinery in accordance with the
directions in the operation instructions.
If the machine is to be used frequently,
contact your dealer and arrange anti-
vibration equipment (handles) if
necessary.
34
All manuals and user guides at all-guides.com
Avoid using the tool in temperatures of
t = 10 °C or lower. Draw up a working
schedule which can be used to
minimise vibration loads.
Information about minimising noise
A certain amount of noise is
unavoidable when using this device.
Ensure you carry out noise-intensive
work during permitted times. Maintain
the quiet periods and limit your work to
the absolute minimum. For the sake of
your personal protection and the
protection of persons in the vicinity,
suitable ear defenders should be worn.
3 – Components
1 Switch for drilling/hammer drilling
2 Locking button for continuous
operation
3 Cable with storage for chuck key
4 On/Off switch with revolution
regulation
5 Right/Left directional switch
6 Handle
7 Depth stop
8 Drill chuck
9 Drill chuck key
4 – Correct use
Drilling in wood and metal, impact drilling
in concrete. Do not use machines, tools
and accessories for additional applications
(see manufaturer's instructions) for works
other than those for which they are
designed for. All other applications are
expressly ruled out.
WARNING! The warranty is voided
by any improper use or use not in
accordance with manufacturer's
instructions. Any necessary repair must
be performed by qualified personal.