Chapter 6 - Safety - Corghi ERCO Série Manuel D'utilisation

CHAPTER 6 - SAFETY

Read this chapter carefully and completely because it contains important information about the
risks for the operator and the person in charge of maintenance in case of misuse of the lift.
The lift has been designed and built to lift vehicles and make them stand
above level in a closed area. Any other use is forbidden, including the
following operations:
washing and painting
scaffolding or people lifting
pressing
hoisting
The manufacturer is not liable for any damage or injury to people, vehicles or
objects resulting from an improper or unauthorised use of the lift.
For operator and people safety, the safety area shown in Figure 8 must be vacated during
lifting and lowering. The lift must be operated only from the operator control panel, as shown.
Operator presence under the vehicle, during working, is only admitted when the vehicle is
lifted and platforms are stopped.
Never use the lift when safety devices are disabled. Failure to follow
these instructions may cause serious damage and injury to people,
lift and lifted vehicles.
MINIMUM SAFETY AREA 1 m
8
98