Chapter 7 - Installation - Corghi ERCO Série Manuel D'utilisation

6.9 Risks resulting from improper lighting
Make sure all areas next to the lift are well and evenly lit, according to local regulations in
force.
6.10 Risks of component failure during operation
Materials and procedures, suitable for the designed parameters
of the lift, have been used by the manufacturer to build a safe
and reliable product. Operate the lift only for the use it has been
designed for and follow the maintenance schedule described in
chapter "Maintenance".
The presence of unauthorised persons next to the lift and on
the platforms is strictly forbidden during lifting as well as
when the vehicle has already been lifted.
Any use of the lift other than that herein specified can cause serious
accidents to people in close proximity of the machine.

CHAPTER 7 - INSTALLATION

Only skilled technicians, appointed by the manufacturer or by
authorised dealers, must be allowed to carry out installation. Serious
injury/damage to people and to the lift may occur if installation
operations are carried out by unskilled personnel.
Before any operation, remember to insert a safety obstacle between
the lower arms and the base frame (see Figure 15).
Before compressed air connection, fill the hydraulic cylinders with oil.
6.11 Risks for improper use
101