Tyre Changer Description; Technical Data; Accessories Included With The Machine; Optional Accessories Supplied On Request - Corghi HD 900 Manuel D'utilisation

TYRE CHANGER
DESCRIPTION
This machine is electro-hydraulically operated,
with exclusive technologies patented by the
manufacturer.
It works on any type of integral wheels (drop
centre and with a side ring) with the maximum
dimensions and weights indicated in the TECH-
NICAL DATA paragraph.
The machine is solidly constructed and has
relatively reduced dimensions in comparison
to its operative capacity. It holds the wheel in a
vertical position and is activated by the operator
by means of a special radio control.

TECHNICAL DATA

- Maximum width.............................2450 mm
- Maximum depth.............................2300 mm
- Maximum height.............................1550 mm
- Gear unit motor .............................1.3 - 1.85 kW
- Hydraulic pump motor.........................1.5 kW
- Machine weight..........................................762 kg
- Wheel dimensions ....from 14" to 46" (56" with PA)
- Maximum wheel diameter...................2300 mm
- Maximum wheel weight..............................1000 kg
- Maximum wheel length...................1065 mm
- Oil tank capacity................................15 l
- Wheel lifter cylinder capacity...............1600 kg
- Noise level:
• A-weighted sound pressure level (L
working position... < 70 dB (A)
The noise levels indicated correspond to emis-
sion levels and do not necessarily represent safe
operating levels. Although there is a relationship
between emission levels and exposure levels,
this cannot be used reliably to establish whether
or not further precautions are necessary. The
factors which determine the level of exposure
to which the operator is subject to include the
duration of the exposure, the characteristics of
the workplace, other sources of noise, etc. The
permitted exposure levels may also vary accord-
ing to the country. However, this information will
enable machine users to make a more accurate
assessment of hazard and risks.
- E - Operator's manual HD 900
nglIsh
ACCESSORIES
INCLUDED WITH
THE MACHINE
- Rim pliers
The locking grip, when fixed firmly to the rim
edge prior to mounting, makes it easier to lift
the tyre, insert it into the rim well and keep it
in position.
- Bead lifting lever
The bead lifting lever keeps the bead in posi-
tion on the tool when demounting agriculture
wheels.
- Side ring lever
The side ring lever is used to make it easier to
remove the side rings from the earthmoving
wheels that use them.
- Grease gun
The grease gun is used for the monthly greasing
recommended for all moving machine parts.
ACCESSORIES
SUPPLIED ON
Please refer to the relevant accessories cata-
) at the
pa
logue.
CONDITIONS OF USE
The tyre changer was designed exclusively for
tyre mounting and demounting.
WARNING
Any use other than those described in this
manual is to be considered improper and
unreasonable.
DANGER
The manufacturer does not intend the machine
to be used for inflation operations. If the opera-
tor decides to proceed with partial bead inser-
OPTIONAL
REQUEST
SPECIFIED
UK
43