Technical Data; General Data And Operating Conditions - Lenze 9300 vector Série Instructions De Montage

3

Technical data

General data and operating conditions

3 Technical data
3.1 General data and operating conditions
General data
Conformity and approval
Conformity
CE
EAC
Approval
UL
Protection of persons and equipment
Type of protection
Earth leakage current
Insulation of control
circuits
Insulation resistance
Protective measures
EMC
Noise emission
Interference immunity
134
2006/95/EC Low−Voltage Directive
2004/108/EG EMC Directive
TP TC 020/2011
Electromagnetic
compatibility of technical
(TR CU 020/2011)
means
TP TC 004/2011
On safety of low voltage
equipment
(TR CU 004/2011)
cULus Power Conversion Equipment (File No. E132659)
EN 60529 IP20
IP41 in case of thermally separated installation (push−through
technique) between the control cabinet (inside) and the
environment.
NEMA 250 Protection against accidental contact in accordance with type
1
IEC/EN 61800−5−1 > 3.5 mA AC
> 10 mA DC
IEC/EN 61800−5−1 Safe mains isolation by double (reinforced) insulation for the
terminals X1 and X5.
Basic insulation (single isolating distance) for the terminals
X3, X4, X6, X8, X9, X10 and X11.
IEC/EN 61800−5−1 < 2000 m site altitude: overvoltage category III
> 2000 m site altitude: overvoltage category II
Against short circuit, earth fault (earth−fault protected during
operation, limited earth−fault protection during operation),
overvoltage, motor stalling, motor overtemperature (input for
PTC or thermal contact)
IEC/EN 61800−3 Cable−guided, up to 10 m motor cable length with mains
filter A: category C2.
Radiation, with mains filter A and installation in control
cabinet: category C2
IEC/EN 61800−3 Category C3
l
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
Observe regulations and safety
instructions!
EDKVF9333V DE/EN/FR 7.2