Yamaha RS Venture RST90GTY 2009 Mode D'emploi page 100

3
2
1
ENGINE ASSEMBLY
• Tighten the rear engine mounting bolt spacer to
specification with an engine mount spacer
wrench 1.
Rear engine mounting bolt spacer:
9 Nm (0.9 m · kg, 6.5 ft · lb)
Engine mount spacer wrench:
90890-01516, YS-01516
• Tighten the rear engine mounting nut.
Rear engine mounting nut:
65 Nm (6.5 m · kg, 47 ft · lb)
• Tighten the front engine mounting bolt spacers
2 (right and left) until they come to contact with
the engine damper 3.
TIP
Do not apply torque to the front engine mounting
bolt spacers.
• Install the washers and nuts and then, tighten
the front engine mounting nuts (right and left).
Front engine mounting nut:
65 Nm (6.5 m · kg, 47 ft · lb)
40
ENG