1
1
2
REAR SUSPENSION
REAR SUSPENSION
Stopper band
1. Adjust:
• Stopper band length
NOTICE
Make sure the left and right rear suspension
stopper bands are adjusted evenly.
TIP
This adjustment affects the handling characteristics
of the snowmobile.
Adjustment steps:
No.4
• Remove the stopper band bolts 1, nuts and
No.3
washers.
No.2
• Adjust the length of the stopper bands 2 by
No.1
inserting the bolts in different holes.
Standard setting:
No. 1 hole (RST90TF/RST90GT)
• Tighten the stopper band nuts.
Stopper band nut:
19
INSP
ADJ
4 Nm (0.4 m · kg, 2.9 ft · lb)