TechnicalData
7.
Technical DaTa
7.1.
conformity
The diaphragm valve of Type 2036 comply with EC Directives in
accordance with the EC Declaration of Conformity.
7.2.
standards
The applied standards on the basis of which compliance with the EC
Directives is confirmed are listed in the EC type examination certificate
and/or the EC Declaration of Conformity.
7.3.
approvals
The product is approved for use in zone 1 and 21 in accordance
with ATEX directive 94/9/EC category 2 GD.
Observe instructions on operation in an explosion-risk (Ex)
area. See chapter "3.1. Use in Ex area".
7.4.
Type label
See chapter "5.6. Valve marking".
Type 2036
7.5.
Operating conditions
Observe permitted pressure ranges given on the type label
of the device.
-10 − +60 °C
Ambient temperature
higher temperatures on request
Relative humidity
max. 80 % (non-condensing)
7.6.
Mechanical data
Dimensions
see data sheet
Materials
Body material
stainless steel: 1.4435/316L
(other materials on request)
Diaphragm
EPDM, Advanced PTFE/EPDM, FKM,
silicone
Actuator
Body
stainless steel precision casting 1.4308
Pressure piece
PPS (Polyphenylensulfid) and V2A
If a control unit or a pilot valve is used, the max. ambient
2)
temperature is +55 °C.
english
2)
17