Technical Data; Type Label - Burkert 2101 Manuel D'utilisation

Technical data

6 TECHNICAL DATA
6.1 Conformity
The Type 2101 conforms to the EU Directives as per the EU Dec-
laration of Conformity.
6.2 Standards
The applied standards as used to verify compliance with the EU
Directives can be found in the EC type examination certificate and/
or the EC Declaration of Conformity.
According to Pressure Equipment Directive observe the following
operating conditions:
Nominal diameter Maximum pressure for compressible
port connection fluids of Group 1 (dangerous gases and
vapours according to Art. 3, No. 1.3,
DN65
6.3

Type label

WARNING!
Risk of injury from high pressure.
Important, device-specific technical data are listed on the type
label.
▶ Note the permitted pressure range on the device type label.
Type 2101
letter a, first dash)
15 bar
Flow coefficient
Seal material
1)
Control function
(CF)
Type
2101 A PTFE
PS 8,5bar Tmed -10°C - +185°C
Made in Germany
Flow 1
00253282
Identification Flow direction
number
of the device
Permitted
instructions for
medium pressure
Fig. 1: Type label (example)
1) For a variant description see "6.5 General technical data"
English
Permitted
medium temperature
CE marking
Kv19.5
2 see manual for derating W17AL
Manufacturer date
(encrypted)
See operating
derating
7