Product Description; General Description; Properties; Technical Data - Burkert 2000 Manuel D'utilisation

Type 2000 INOX

Product description

5. PRODUCT DESCRIPTION

5.1. General description

The 2/2-way angle seat valve Type 2000 INOX is suitable for liquid
and gaseous media.
It uses neutral gases or air (control media) to control the flow-rate
of water, alcohol, oil, fuel, hydraulic fluid, saline solution, lye, organic
solvent and steam (flow media).

5.2. Properties

• High leak-tightness.
• High flow values.
• Control air connection can be rotated centrally and steplessly
through 360°.
• Optical position indicator
• Maintenance-free
5.2.1. Restrictions
When flow inlet over seat, the angle seat valve must not be used for
liquid media due to the risk of water hammer!
6.

TECHNICAL DATA

6.1. Conformity

The angle seat valve, Type 2000 INOX, conforms to the EC Directives
according to the EC Declaration of Conformity

6.2. Standards

The applied standards, which are used to demonstrate compliance
with the EC Directives, are listed in the EC type test certificate and/or
the EC Declaration of Conformity.

6.3. Operating conditions

6.3.1. Permitted temperatures
Ambient temperature: 0 °C ... +60 °C
Medium temperature: 0 °C ... +180 °C
The angle seat valve is autoclavable.
For this purpose, the control air connection must be
removed.
The combination of maximum medium temperature and maximum
ambient temperature is indicated on the graph in "Fig. 1":
english
7