16
Instructions for Use
Use
TV 401/301 MS Switching off
To switch off the TV 401/301 MS it is necessary to remove the mains.
The integrated controller immediately stops the pump.
WARNING!
The Turbo-V controller must be powered with 3-wire power cord (see
orderable parts table) and plug (internationally approved) for user's safety.
Use this power cord and plug in conjunction with a properly grounded
power socket to avoid electrical shock and to satisfy CE requirements. High
voltage developed in the controller can cause severe injury or death. Before
servicing the unit, disconnect the input power cable.
Emergency Stop
To immediately stop the TV 401/301 MS in an emergency condition it
is necessary to remove the supply cable from the mains plug.
202/266
TV 401/301 MS User Manual / 87-901-013-01 (B)