Tv 401/301 Switching Off; Emergency Stop - Agilent Technologies TV 401/301 NSF Mode D'emploi

TV 401/301 Switching off

To switch off the TV 401/301 NSF it is necessary to remove the
mains. The integrated controller immediately stops the pump.
WARNING! The Turbo-V controller must be powered with 3-wire power cord (see
orderable parts table) and plug (internationally approved) for user's safety.
Use this power cord and plug in conjunction with a properly grounded power
socket to avoid electrical shock and to satisfy CE requirements. High voltage
developed in the controller can cause severe injury or death. Before servicing
the unit, disconnect the input power cable..

Emergency Stop

To immediately stop the TV 401/301 NSF in an emergency condition
it is necessary to remove the supply cable from the mains plug.
TV 401/301 NSF User Manual / 87-900-963-01 (E)
15BInstructions for Use
142BUse
16
233/290