Publicité
Les langues disponibles
Les langues disponibles
Warranty
A 24-month warranty starting upon supplying the appliance from the manufacturer's stock is provided for appliance
defects caused by material defects or manufacturing defects.
We are not liable for any damage caused as a result of unauthorised handling or failure to follow the Operating
Instructions. Please send any defective parts pre-paid to our plant. The spare part replacement decision will be
made by us.
Appropriate warranty works will be performed by our Company or a shop authorised by us. Express consent of our
Company is needed in respect of any defect to be removed by any other company.
The warranty is only provided if original spare parts are used. Changes made due to technical progress reserved.
Technical specifications
AC engine
Engine power
Voltage
Switch-on time
Thermal class
Bench size
Bench height
Cut depth
Engine speed
Cut depth adjusting
Height adjusting (circular saw blade)
Circular saw blade
Circular saw blade
Weight
Protection class
Air volume
Recommended air supply in exhaust
position
The appliance meets EN 61000-3-11 requirements and is subject to special connection conditions. That means that use on
optionally selected connection points is inadmissible.
The appliance can lead to occasional voltage fluctuations under unfavourable power conditions.
The appliance is only designated to be used for connection points not exceeding the maximum allowed impedance of Zmax =
0,233 Ω.
As a user, you must make sure your connection point on which you want to use the appliance meets the above-mentioned
requirements – after agreement with your electricity supplier if necessary.
GTKS 315/230 Volt
P1 / 2 kW
230 V/50 Hz
S6 - 20% / 10 min.
B
800/553 mm (l/w)
810 mm
84 mm
-1
2,950 per min
continuous
0 – app. 84 mm
315 x 30 mm
Hard metal, 40 teeth
Degree of deflection 45°
app. 50 kg
IP 54
3
24 m
per hour
> = 20 m/s
25
GTKS 315/400 Volt
P1 / 2.2 kW
400 V/50 Hz
S6 - 20 % / 10 min.
B
800/553 mm (l/w)
810 mm
84 mm
-1
2,950 per min
continuous
0 – app. 84 mm
315 x 30 mm
Hard metal, 40 teeth
Degree of deflection 45°
app. 50 kg
IP 54
3
24 m
per hour
> = 20 m/s
Publicité
