Güde GTKS 315/230V Mode D'emploi page 26

Assembly instructions
Pic. 1
Pic. 2
Pic. 3
APPLIANCE ASSEMBLY
• Put the main part 1 on an appropriate work bench.
• Take two M6x16 hex head bolts, two M6 washers
and two M6 nuts and mount part 2 to the main part
1. Screw the guide rails along with the feet. Make
sure longer bolts for rails are used.
• Using two ST4.2x13 guide bolts, mount part 1 to
part 2 (see pic. 2).
• Take four M6x16 hex head bolts, four M6 washers
and four M6 nuts and mount part 3 to the main part
1. Bolts to be inserted to positions A, B, C and D
shown in pic. 3. The bolts must not be tightened
too much.
26