Güde GTKS 315/230V Mode D'emploi page 27

Pic. 4
Pic. 5
Pic. 6
Pic. 7
• Take four M6x16 hex head bolts, four M6 washers
and four M6 nuts and mount part 4 to the main part
1. The bolts must not be tightened too much (see
pic. 4).
• Take five M6x16 hex head bolts, five M6 washers
and five M6 nuts and mount part 5, part 7 and part
8 to the main part 1. The bolts must not be
tightened too much (see pic. 5).
• Connect parts 2, 3, 4 and 5 with parts 9 and 10
(see pic. 6). The bolts must not be tightened too
much.
• Parts 8 and 9 must be connected with part 11 (see
pic. 7). For this, you need four M6x16 hex head
bolts, four M6 washers and four M6 nuts. The bolts
must not be tightened too much.
27