Publicité
Les langues disponibles
Les langues disponibles
Noise emission parameters
ISO/TR11638-1995
Acoustic power level
idling
Lwa = 101.l dB(A)
load
Lwa =106.84 dB(A)
Acoustic pressure level in the place of work
idling
Lpa =69.26 dB(A)
load
Lpa =93.26 dB(A)
The given values are emission values and do not therefore represent safe values in the place of work. Although
there is correlation between emission and pollution values, they cannot be a reliable basis for deriving whether or
not additional preventive measures are necessary. The factors that may influence the immediate pollution value in
the place of work include the duration of effects, specific features of the place of work, other noise sources, e.g.
number of appliances and other neighbouring processes. Reliable values in the place of work may also differ in
various countries. However, this information is to help the user better estimate the risk and threat.
Putting the appliance into operation
1.
Put the circular bench saw to a place that is:
non-slip
-
with no vibrations
-
even
-
with no risk of trip
-
adequately lighted
-
2.
Check the following every time the appliance is to be used:
whether there is any damage (cracks, cut-offs, etc.) to the supply cable
-
defective supply cable not to be used
-
check the protection cover whether in proper condition
-
check the circular saw blade whether in perfect condition
-
check whether the shifting rod is at disposal
-
3.
Do not use circular saw blades that are broken or deformed.
4.
Do not use high-speed steel circular saw blades.
5.
When cutting, stand to the side of the dangerous saw (circular saw blade) area.
22
Publicité
