English; Description Of Device; Intended Use; Description Of Function - Seca 787 Mode D'emploi Et Garantie

1. DESCRIPTION OF DEVICE

1.1 Intended use

1.2 Description of function

Measuring station

USB interface (seca 797 only)

Internal interface module (seca 797
External interface module (optional
accessory for seca 787)
seca connect 103 software
(optional accessory)

1.3 User qualification

The
national regulations primarily in hospitals, medical practices and in-patient
care facilities.
The
nation of weight and height and for determining the general state of nutrition;
they support the attending physician in making a diagnosis or deciding on a
course of treatment.
To make an accurate diagnosis, however, the physician needs to commission
other specific examinations and take their results into account, in addition to
determining weight and height.
On the
load cells. Height is recorded with the integrated measuring rod. Height val-
ues above 1.22 m are recorded digitally. Height values below 1.22 m are read
off by the user and recorded manually.
Body mass index (BMI) can be calculated automatically from the measuring
results.
A barcode scanner can be connected to the USB interface. This allows users
and patients to be identified by means of their barcodes and measuring
results assigned in the EMR system.
With the aid of the internal interface module, the
only) can transmit data to the
With the aid of the
ing station can transmit data to the
LAN connection.
The
external interface module and transmits it to an EMR system.

Assembly

Devices that are shipped partially assembled may only be mounted by suffi-
ciently qualified persons such as specialist dealers, hospital technicians or
seca Service technicians.

Operation

The device may only be operated by healthcare professionals.
Administration
The device may only be set up and incorporated in a network by experienced
(seca 797 only)
administrators or hospital technicians.
and measuring stations are used in accordance with
seca 787 seca 797
and measuring stations are for conventional determi-
seca 787 seca 797
and
seca 787 seca 797
seca connect 103
external interface module, the
seca 452
software receives measured data from an internal or
seca connect 103
measuring stations, weight is recorded by four
seca 797
software via a WiFi connection.
software via a WiFi or
seca connect 103
Description of device • 5

English

measuring station
measur-
seca 787