salmson SIE Série Notice De Montage Et De Mise En Service page 91

12 Spare parts
Spare parts table
Installation and operating instructions SIE - DIE
Spare parts may be ordered via local professional technicians and/or
the Salmson after-sales service.
To avoid queries and incorrect orders, all data on the name plate
should be submitted for each order.
CAUTION! Danger of material damage!
Problem-free pump function can only be guaranteed when original
spare parts are used.
• Only use original Salmson spare parts.
• When ordering spare parts, please indicate the above-named spare
parts numbers and designations, as well as all data on the pump and
motor type plates.
NOTE
For all installation work, the forked spacer is urgently required for set-
ting the correct impeller position in the pump housing.
Subject to change without prior notice!
Allocation of assemblies, see Fig. 5
No. Part
1.1 Impeller kit
1.11
1.12
1.13
1.14
1.2 Mechanical seal kit
1.11
1.12
1.14
1.21
1.3 Lantern kit
1.11
1.12
1.14
1.31
1.32
1.33
1.4 Shaft kit
1.11
1.12
1.14
1.41
2 Motor
3 Complete pump housing
1.14
3.1
3.3
4 Fastening screws for lan-
tern/pump housing
5 Fastening screws for motor/
lantern
6 Nut for motor/lantern fas-
tening
7 Washer for motor/lantern
fastening
8 Adapter ring
9 Pressure measuring unit
10 Forked spacer
11 Module
English
Details
Nut
Spring washer
Impeller
O-ring
Nut
Spring washer
O-ring
Mechanical seal
Nut
Spring washer
O-ring
Bleed valve
Coupling protection
Lantern
Nut
Spring washer
O-ring
Coupling/shaft complete
O-ring
Pump housing
Switchover valve
(for double pump)
85