Changing The Filter; General Cleaning - Rotel Universa 785 Mode D'emploi

5.6 Changing the filter

The effectiveness of the filter will be exhausted after drawing approx. 50 litres of water.
«Filter replace» appears on the display.
☛ Y ou can still draw coffee, hot water and steam. We would recommend that you
should always replace the filter immediately, however.
Please note: If your use of water is lower, the filter must be replaced after two months
at the latest. No message appears in the display. You can set the replacement date
using the special rotary indicator on the top of the filter.
Turn the Control button (2) to the symbol in the Main menu:
• Press the Control button to confirm.
• Turn the Control button to «Filter» and press it to confirm.
• «Filter inserted? Yes» appears in the display. Press the Control button to confirm.
• Turn the Control button to «Filter change».
• Press the Control button to confirm. «Replace filter» appears in the display.
• Empty the water tank (14).
• You can remove the old filter from the tank and carefully screw in the new one with
the help of the mounting tool.
• Fill the tank with fresh water and put it back into the coffee machine.
• Place a sufficiently large receptacle under the outlet (5) and press the Control but-
ton. The system will now be rinsed and the display shows «Rinsing filter».
• The appliance rinses itself, and is now ready for operation again.
5.7 General cleaning
☛ Never immerse the appliance in water.
☛
Do not use any scouring cleaners for the cleaning.
• Use a soft, damp cloth to clean the inside and outside of the case.
• Empty the drip tray (6b) and the grounds holder (6c), at the latest when this is indi-
cated in the display. Use soapy water for cleaning from time to time.
☛ When cleaning the drip tray (6b), always ensure that the two contacts (6d) at
the back of the tray are always clean.
• The water tank should be rinsed daily and be refilled with fresh, cool water.
☛ D ried milk residues are difficult to remove. You should therefore clean the
frother, the hose and the outlet (spout) regularly (see Chapters 5.1 – 5.3).
Note: The frother must be completely dismantled from time to time, and all its indi-
vidual components should be rinsed under clear water:
• Remove the lower cover plate at the outlet (5) (Fig. C).
• Pull out the frother downwards (Fig. D) and dismantle it into its individual compo-
nents. (Fig. E).
Settings
63