Rotel Universa 785 Mode D'emploi page 48

• Turn the Control button (2) to «Prop. coffee». The set percentage starts blinking.
• Turn the Control button until the desired percentage and confirm it by pressing the
Control button. The set number stops blinking.
☛ When you change the «Prop. coffee», the values of «Amount milk» and
«Amount frothy m.» will be adapted automatically.
Amount of frothy milk for Cappuccino, Latte Macchiato and warm milk
☛
Y ou do not need to add the milk separately when preparing Cappuccino and
Latte Macchiato; the appliance will do this automatically (see Points 3.3 and 3.4).
You can determine how much frothy milk you would like in relation to the total
amount (in ml).
• Turn the Control button (2) to «Amount frothy m.». The set amount starts blinking.
• Turn the Control button until the desired amount appears, and confirm it by pressing
the Control button. The set amount stops blinking.
☛
Cappuccino: If you change the «Amount frothy m.», the «Prop. coffee» will be
adapted automatically.
☛ Latte Macchiato: If you change the «Amount frothy m.», the «Amount milk» will
be adapted automatically.
Milk amount for Latte Macchiato
You can determine how much milk and how much frothy milk you would like in the
preparation of Latte Macchiato.
• Turn the Control button (2) to «Amount milk». The set amount starts blinking.
• Turn the Control button until the desired amount appears, and confirm it by pressing
the Control button. The set amount stops blinking.
☛ If you change the «Amount milk», the «Amount frothy m». will be automatically
adapted.
☛
The total amount of «Amount milk» and «Amount frothy m». always remains in
the same ratio to the percentage setting of «Prop. coffee». For example, if you
enter 300 ml as the «Amount total» and 20% for «Prop. coffee», the sum of
«Amount milk» and «Amount frothy m.» will always be 240 ml.
Temperature
☛
This display will only appear for each type of preparation if you have pro-
grammed the «Temperatures» menu point in «Settings» to «Individual».
You can set the coffee temperature to «Normal», «High» and «Maximum».
• Turn the Control button (2) to «Temperature». The set level starts blinking.
• Turn the Control button until the desired level appears, and confirm it by pressing
the Control button. The set level stops blinking.
52