Temperature; Times; Programming The Time - Rotel Universa 785 Mode D'emploi

4.3 Temperature

You can set the coffee temperature to «Normal», «High», «Maximum» or «Individual»,
as you wish. The temperature that you program here will then apply for all coffee
specialities. In order to be able to individually determine the temperature for each cof-
fee speciality (see Chapter 3.8) you will have to program the «Individual» level here.
The basic factory setting is «High».
Turn the Control button (2) to the symbol in the Main menu:
• Press the Control button to confirm.
• Turn the Control button to «Temperature» and press it to confirm.
• Turn the Control button to the desired setting.
• Press the Control button to confirm the entry.
• The display shows a list of the settings.
• You can either continue programming or return to the Main menu with the Exit
button (4).

4.4 Times

The following time-related settings can be programmed:
Clock – Switch-on time – Switch-off time – Switch on cup heater – Time format
Please note: The functions «Switch-on time, Switch-off time» and «Cup heater» can
only be programmed if the clock has been enabled (see Chapter 4.4.1).

4.4.1 Programming the time

☛ If the time has been programmed, it will appear in the display in the Stand-By
mode. If the clock has been disabled, the «On/Off» symbol appears in the
display in the Stand-By mode.
Note: The clock will have to be set up again if the appliance is switched off using the
Main power switch or if there is a power failure. Otherwise the functions 4.4.2 – 4.4.4
will not be able to be used.
Turn the Control button (2) to the symbol in the Main menu:
• Press the Control button to confirm.
• Turn the Control button to «Times» and press it to confirm.
• Turn the Control button to «Clock» and press it to confirm.
• Turn the Control button to «Disable» if you want to switch the clock off, or to «Set
clock» if you want to enable the clock.
• Press the Control button to confirm.
Settings
Settings
55