Maintenance And Care; Filter Use; Changing Filter; Rinsing Filter By Hand - Rotel AROMATICA LUXE 270 Mode D'emploi

5. Maintenance and care

5.1 Filter use

☛
Please read chapter 4.1 Filter (page 27) on filter use.

5.2 Changing filter

The effectiveness of the filter is exhausted after about 50 l of water. The
lights up and the service button (7) blinks.
TIP: Press the service button only when you want to change the filter.
☛
You can continue to brew coffee or draw hot water and steam. However, we
recommend that you change the filter immediately.
• Press the service button (7) ca. 4 sec. The
• Empty the water tank (17) and change the filter.
• Fill the tank with freshwater and put it back into the coffee machine.
• Hold a receptacle under the steam-hot water jet (12) and turn the steam/hot water
dial (11) to the right. The system will be rinsed.
• Wait until no more water comes out of the jet and then turned the dial (11) back to
the left.
• The system will be heated up briefly (
normal symbol for brewing coffee appears on the screen.

Rinsing filter by hand

☛
You must change the filter after two months of the latest even when your coffee
machine is used just a little. You will not see a symbol in the display, and you
must rinse the new filter by hand.
☛
You can set the date for change in the filter using the special indicator on top of
the filter.
• Using the on/off button (2), switch your coffee machine ON (operation mode).
• Press the service button (7) for about 4 sec. The
another.
• Wait until the
• The symbol begins to blink.
• Press the service button (7) for ca. 4 sec. The
• Continue as described above for «Empty the water tank...»

5.3 Cleaning program

If the coffee machine needs to be cleaned, the
button (7) blinks.
TIP: Press the service button only when you want to start cleaning.
30
symbol for Filter lights up and press the service button (7).
symbols blink.
blinks) and is then ready for operation. The
symbols light up one after
symbols blink.
symbol appears and the service
symbol