Configuration; Osm Interface (On Screen Menu); Using The Osm; How To Use The Joystick - Videotec ULISSE MAXI Manuel D'instructions

10 Configuration

10.1 OSM interface (On Screen
Menu)

10.1.1 Using the OSM

During normal operation of the unit, you can activate
the OSM to select and configure advanced functions..
For further information, refer to the manual of the
keyboard used and to the relative chapter. (12.11
Special controls, page 56).
Exit the OSM with Wide Zoom (Zoom-).
This is a dynamic self-configuration menu
based on the Pan & Tilt model.
38

10.1.1.1 How to use the joystick

All operations in the menus are carried out using the
joystick.
Left
Fig. 77 Pan & tilt.
Exit
Fig. 78
Wide Zoom and Tele Zoom.
If you use control keyboards with 2-axes
joystick, use the Wide Zoom and Tele Zoom
buttons to Exit and Confirm.
Up
Right
Down
Confirm
MNVCUPTMAXB_1511_EN