Identification; Product Description And Type Designation; Product Markings; Checking The Markings - Videotec ULISSE MAXI Manuel D'instructions

4 Identification

4.1 Product description and type
designation
ULISSE MAXI is a robust and efficient PTZ camera
unit designed to ensure dynamic and non-stop
surveillance of large outdoor areas and withstand
harsh weather conditions.
This model can contain and manage the largest
motorised lenses on the market, with a total weight
of up to almost 8 kilos.
This way a single unit can provide a 360° coverage of
the area to be monitored.
To ensure detailed images even during the night
hours, versions are available with LED illuminators,
with infrared light or white light.
The sturdy mechanical structure and the powerful
motors of this PTZ are designed to guarantee
maximum resistance to high operating stress,
vibrations and temperatures between -10°C to +60°C.
The unit is equipped with optical sensors which
ensure the accurate control of the position in any
condition of use.
The unit is equipped with a wiper for removing
rain and dust from the front glass; there is a wide
selection of jerry cans with washer pump, different
capacities and heads.
Models are available for vision with a thermal camera.
10

4.2 Product markings

Pan & tilt devices have a label complying
with CE markings.
Fig. 1
The label shows:
• Model identification code (Extended 3/9 bar code).
• Power supply (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Weatherproof standard (IP).
• Serial number.

4.2.1 Checking the markings

Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.
MNVCUPTMAXB_1511_EN