Split Function; Selecting A Split Type - Sony UPX-DP10 Mode D'emploi

Split Function

Selecting a Split Type

You can select the type of printout from among six
choices, a full-sized image or split reduced-image
printout, on the station. The print size set for each
choices can be changed with the procedures below.
For details on the print size, see "Print Size in Each SPLIT
Mode."
Selecting procedures
CAMERA
RELERASE
BA TTERY
MENU
CHARGE
1 2
EXEC
4 3
1
Connect the station to power source while holding
down the SPLIT button.
For details on power connection, see "Power
Connections."
2
Release the SPLIT button when "SPLIT1 TYPE:
1" appears on the LCD.
Split number
S P L I T 1 T Y P E : 1
< 1 +>
1 2 4
Selected split type
1,5
to wall outlet
UPX-C21
POWER/BUSY
B/W COL
BW/
COLOR
SPLIT
4 8 9 16
1,2
Selected type number
B/W COL
[ 1 - 2 ]
8 9 16
Selectable number
of types
Selected type number
3
g
Press the key to select the type for SPLIT1.
4
f
Press the key to select SPLIT2.
Repeat steps 3 and 4 until necessary settings for
SPLIT1, SPLIT2, SPLIT4, SPLIT6, and SPLIT9 have
been done.
5
When setting is finished, disconnect the power
connection of the station.
77