Printer - Sony UPX-DP10 Mode D'emploi

Locations of Parts

Printer

Front
1
1 POWER button (54)
Turns the power to the printer ON or OFF.
2 Ribbon cartridge cover (30)
Open the cover to insert and remove the ink ribbon
cartridge.
3 Lamps (54)
POWER lamp: Lights when the power is turned ON.
PRINT lamp: Lights while printering is in progress,
and flashes while the printer is receiving image
data.
PAPER lamp: Lights when a problem for paper
occurs.
RIBBON lamp: Lights when a problem for the ink
ribbon cartridge occurs.
ERROR lamp: Lights in case of paper jamming or
occurrence of any other problem.
4 Paper supply/eject tray cover (33)
Open the cover to load the printing paper.
18
2 3 4
Rear
5 USB connector
This connector is not used.
6 PARALLEL DATA connector (38)
Connect the interface cable of the station.
7 AC IN connector (36)
Connect to a wall outlet using the supplied AC power
cord.
5 6 7