Sony UPX-DP10 Mode D'emploi page 17

0 Cursor keys (56, 69)
Use during the menu operation.
qa MENU button (56, 69)
Press to enter menu operation, including lamination
(overcoat), number of prints, color adjustment, and
total number of prints. Press again to return to the
normal display.
qs CAMERA RELEASE lever (39)
Slide to the left to detach the camera.
qd CAMERA connector (minijack) (40)
To use the camera far from the station, connect to the
RS-232C connector of the camera.
qf PRINTER connector (D-sub 25-pin) (38)
Connect to the PARALLEL DATA connector of the
printer.
qg DC IN connector (37)
To supply DC power to the station, connect the AC
power adaptor (supplied).
17